Next Steps

How to manually provision a Polycom SoundStation IP on the dVoice UC Platform

Phone model used: Polycom SoundStation IP 7000.

The steps also apply to other Polycom SoundStation phone models.

1. Go to ‘Menu’

20151110_143243.jpg

2. Go to ‘Settings’ using the up & down arrow keys of your navigation tool. Press ‘Select’.

7000__2_.jpg

3. Go to ‘Advanced’ using the up & down arrow keys of your navigation tool. Press ‘Select’.

20151110_143306.jpg

4. Enter the password '456' using the Dial Pad. Press ‘Enter’.

20151110_143317.jpg

5. Go to ‘Admin Settings’ using the up & down arrow keys of your navigation tool. Press ‘Select’.

20151110_143323.jpg

6. Go to ‘Network Configuration’ using the up & down arrow keys of your navigation tool. Press ‘Select’.

20151110_143325.jpg

7. Go to ‘Prov. Server:’ using the up & down arrow keys of your navigation tool. Press ‘Select’.

20151110_143327.jpg

Step 8. Go to ‘DHCP Menu’ using the up & down arrow keys of your navigation tool. Press ‘Select’.

20151110_143331.jpg

9. Go to ‘Boot Server’ using the up & down arrow keys of your navigation tool. Use the left & right arrow keys of your navigation tool until it is on ‘Static’. Press ‘OK’.

7000_3_.jpg 

10. Press 'Back'.

20151110_143347.jpg

11. Go to ‘Server Type’ using the up & down arrow keys of your navigation tool. Use the left & right arrow keys of your navigation tool until it is on ‘HTTP’. Press ‘OK’.

20151110_143353.jpg

12. Go to ‘Server Address’ using the up & down arrow keys of your navigation tool. Use the Dial Pad to enter the server address: cfg.voice.dynmx.net/cfg Press ‘OK’.

20151110_143449.jpg

13. Continue pressing ‘Back’ until you arrive a screen where you can save your configurations. Go to ‘Save Config’ using the up & down arrow keys of your navigation tool and press ‘Select’. You have manually provisioned the phone and it will auto-reboot.

20151110_143458.jpg